Hot Tub Removal: Do’s and Dont’s

In 2019, the APSP estimated that about 5.8 million hot tubs belong to American homeowners. This is based on 125 million US households.

Hot tubs are great for people who have retired or are looking for a way to relax. But, it’s important to remember that hot tub removal isn’t as easy as it looks. It’s best to learn the dos and don’ts of removing a hot tub.

There’s plenty to know about owning a hot tub, like our hot tub buyer’s guide. But, this article focuses on tips and tricks for making hot tub removal easier.

What Are the Dos of Hot Tub Removal?

Hot tub removal and installation might be easy for some people, but not for everyone. If you’re retired or aren’t very strong, you’ll need help while removing your hot tub.

If you have your hot tub’s original instruction guide, look over it before you get started. Giving the original guide a quick overview will help you get reacquainted with your hot tub.

It allows you to familiarize yourself with the spa, and avoid injury. Before starting on your DIY hot tub removal, unplug the unit:

Removal and Disassembly

There are a few safety precautions you should take before beginning to remove your hot tub. One of the essential tips for removing a hot tub is to unplug your tub from all electrical outlets.

Remove the heater and all the electrical equipment that comes with the hot tub. In most cases, the skirt of the hot tub is made from wood, so you can take it apart using a screwdriver.

Removing the bed of the tub is a little more difficult than the skirt. The hot tub bed comes in one piece and is most commonly made from any sturdy material, like fiberglass.

This is the part where you want to make sure you have all your safety equipment. Using a jigsaw or reciprocating saw might make this step a little easier.

What Are the Don’ts of Hot Tub Removal?

There are some obvious don’ts to remember while removing your hot tub. Don’t start the removal process with your hot tub plugged into an electrical outlet. Likewise, don’t leave the heater attached to the tub or leave any electrical systems on. 

Another method to consider while removing your hot tub is not taking it apart before removing it. It’s not a good idea to destroy your tub while there’s still water inside. Empty the tub before you start hammering away.

You can try using a hammer to smash your hot tub to pieces, but it’s better to use a saw. While destroying the hot tub, don’t damage the deck or foundation. You’ll need those two things when you buy a new one.

What Other Hot Tub Removal Options Do I Have?

Removing a hot tub can be a difficult process, especially if you’re retired. So take a load off and hire someone else to do the job for you.

If you have a hot tub or spa that’s over a decade old, and you want it gone, we’ll remove it for you. If you hire us for hot tub removal, we’ll make sure to get the job done safely and professionally.

Do you have a hot tub you don’t want anymore? Backyard Oasis is currently offering free hot tub removal.

Want to create your Backyard Oasis? Send us a message!

Not readable? Change text. captcha txt